Aldila Ascent PL helps you wing the golf club faste with no sacrifice in feel. It was designed to help golfers gain more speed.

Aldila Ascent Ultralight 40 models deliver an easy, high launch angle without the typical compromises of an ultra-lightweight shaft. Featuring Focused Mass Technology (FMT), a precise weighting section that utilizes heavier, tungsten-infused prepreg in the butt end to help players turn through the ball better for stronger, straighter/drawn ball flight.

Aldila Rogue Silver MSI offers unmatched performance and consistency through the use of advanced, extremely high modulus, Graphitic Carbon Fibers that provide performance characteristics never before available in a golf shaft.

Aldila Rogue White MSI pushes the limits of performance with the use of extremely high modulus, 130 M.S.I. Graphitic Carbon Fibers to provide the ultimate in performance from a Mid Launch, Low Spin profile.

Fujikura Ventus Black Velocore+ enhanced with new VeloCore+ Technology and advanced material designs to offer players even greater performance results than their predecessors.

Fujikura Ventus Blue Velocore+ technology is designed for ultimate clubhead stabilization and promotes consistent center-face contact, tightening dispersion and increasing control of the club throughout the swing.

Fujikura Ventus BLUE (NON VELOCORE) 

Fujikura Ventus Red Velocore+ Featuring a re-engineered multi-material bias core, VELOCORE+ enhances the feel and performance of VENTUS with an additional premium bias core material, promoting even tighter dispersion and increased ball speeds.

Fujikura Ventus TR Black Ultra-stiff tip and handle sections work in unison to support players with Tour-like speeds that prefer the feeling of minimal to no flex during the swing.

Fujikura Ventus TR Blue an ultra-stiff tip section for superior control at impact. Increased torsional stiffness creates a profile with enhanced load capabilities for more aggressive swings while maintaining a smooth overall feel.

Fujikura Ventus TR Red The softest tip section of the TR lineup is ideal for players seeking a mid-high launch profile with controlled spin and increased stability.

GDI Tour AD DI is designed to provide golfers with more power and stability in a golf shaft. Designed and manufactured exclusively at the Graphite Design factory headquarters in Japan, the Tour AD DI shafts are available in 50g R2(Lite), R1(Regular) and S flex, 60g SR (Stiff Regular), S and X flex, 70g S, X and TX (Tour X-Stiff) flex, 80g S, X and TX flex and 90g X flex.

GDI Tour AD GC Designed and manufactured in Japan, these wood shafts are pearl white with bronze and orange accents, finished with a gloss clear coat. The Tour AD GC features a stiff butt section, firm center, and firm+ tip, promoting mid launch angles and low/mid to mid ball spin rates.

GDI Tour AD HD series is a shaft that maximizes the head performance of large and high moments of inertia, which is the mainstream of wood today.

GDI Tour AD IZ introduces the latest in the Tour AD premium line of golf shafts, the Graphite Design Tour AD IZ – “ Into the Zone” . Designed and manufactured at the Graphite Design Japan factory headquarters, the new Tour AD IZ wood shaft has a very stealthy look to it in black with white/orange accents and a sleek new matte finish.

GDI Tour AD VF utilizes the modern TORAYCA M40X carbon-fiber material in the butt section of the shaft to support a stiff, yet smooth feeling kick point and the ultra-high modulus TORAYCA T1100G carbon-fiber material in the middle thru to the tip section of the shaft for unrivaled shaft stability and precise ball control without the loss of the exceptional feel.

GDI Tour AD XC shaft profile is softer in the butt section, stiff in the center section and has a stiff tip to promote low/mid launch angle and low spin with the ball.

KBS TD WOOD SHAFT Designed for performance, optimizing spin rate and launch for more distance and more consistent, tighter ball flights.

MCA Diamana BB the second profile in the most recent generation – is designed with all the traditional branding that made Diamana™ so beloved – including a return to the original 53/63/73/83 weight class designations – and all the engineering prowess and material innovation that made the brand dominant on tour.

MCA Diamana WB Built on an extraordinarily popular and tour-proven platform, the Diamana™ WB model delivers the classic low-low performance and the legendary stability you’ve come to expect, along with the iconic, unmistakable cosmetic so closely associated with the original Diamana™ shafts.

MCA Tensei 1K Blue the mid-launch, mid-spin member of the 1K family. The TENSEI™ 1K Blue features a firm butt-section reinforced with the same 1K Carbon Cloth as the 1K Black shaft, a firm and stable tip-section featuring our proprietary Xlink Tech™ Resin System and a smooth mid-section for ease of transition during the swing.

MCA Tensei 1K Black utilizes a focused application of 1K carbon fiber -- the same high-performance material found in the TENSEI 1K Pro family -- to increase strength in the handle, drive down torque and provide the signature "1K feel."

MCA Tensei AV-Xlink Blue he incorporation of Xlink Tech Resin System allows the shaft's carbon fiber volume to drastically increase to improve feel all while increasing the overall strength of the shaft.

MCA Tensei AV-Xlink White Incorporating Mitsubishi’s proprietary Xlink Tech Resin System into its construction, our engineers are able to drastically increase carbon fiber volume to improve feel while also increasing the overall strength of the shaft.

MCA Tensei Kai'li Blue our stablest and smoothest blue profile yet. A modern mid-launching, mid-spinning shaft built to provide the stability demanded by stronger swings and heavier head weights.

MCA Tensei Kai'li White features an exclusive Super Low Resin Content Prepreg in the most consequential part of the golf shaft for feel: the torque core. This application allows for an increased volume of carbon fiber to help drive torque lower, increase stability, and provide greater frequency response to the golfer’s hands... even in a low launch shaft.

MCA Vanquish PL 40 was built to provide high-level performance in a lightweight shaft. It uses Amorphous wire in the butt section. The amorphous wire’s elasticity increases the activity in the handle of the shaft to maximize speed and club head acceleration.

Project X Denali Black Straight taper mid section provides unmatched feel and maximum energy transfer.

Project X Denali Blue features a stable butt section and low torsional stiffness for stability and confidence throughout the swing

Project X Denali Red Featuring a stable butt-section, for confidence in the hands, with a straight taper mid-section, for a smooth energy transfer, Denali provides a unique blend of stability and feel.

Project X HZRDUS Blue RDX is a counterbalanced design that features a soft midsection to maximize shaft load and feel while maintaining a stout butt and tip section to keep up with all swing speeds and provide a stable feel through impact.

True Temper

TT HZRDUS BLACK GEN5 the most successful low launch/spin shaft models of the past decade continues to innovate with the addition of our new 4D Optimized Carbon weave. Strategically utilized in the midsection, the part of the golf shaft that undergoes the most stress, and angled for improved torsional resistance.

UST

UST Helium Nanocore Black Ultra High Performance lightweight golf shaft design, featuring our new Nanocore Technology for increased clubhead speed.

UST Lin-Q M40X Blue shafts with increased strength and phenomenal feel. Incorporating M40X into the tip area provides significantly improved lateral stability to the shaft during the golf swing, thereby delivering increased energy to the golf ball at impact.

UST Lin-Q M40X White eliminates the "boardy" feel through the use of proprietary nano technology and nanoalloy used in the prepreg matrix resin. This novel combination significantly improves shaft feel and performance.

Cleveland HiBore XL Lite Custom Driver Grips

Golf Pride

Model	Image
GP 2G Tour Wrap Black .60
GP 2G Tour Wrap Red .60
GP 2G Tour Wrap White .60
GP CP2 Pro Red .60
GP CP2 Pro Wrap Blue .60
GP MCC Align Blk/White
GP MCC Plus4 Align Grey
GP MCC Plus4 Blue .60
GP MCC Plus4 Grey .60
GP New Dec MCC Blk/Blue
GP New Dec MCC Blk/Red
GP New Dec MCC Blk/White
GP Tour Velvet 360 .58
GP Tour Velvet 360 ZipCore
GP Tour Velvet Align
GP Tour Velvet Full Cord .58
GP Tour Velvet Plus4
GP Tour Wrap MicroSuede Under Size
GP Z Cord Midsize
GP ZGRIP Cord

JunmboMax

Model	Image
JumboMax JMX Ultralite

Lamkin

Model	Image
Lamkin Crossline 360 Genesis
Lamkin Crossline .58
Lamkin Crossline 360 Blank
Lamkin Sonar+
Lamkin Sonar+ Black
Lamkin ST Soft Womens
Lamkin St+2 Hyb
Lamkin UTx (Solid Gray)
Lamkin UTX Blue
Lamkin UTX Green

Winn

Model	Image
Winn Dri-Tac
Winn Dri-Tac Gray
Winn Dri-Tac Lite
Winn Excel

Specification