PING G425 LST Custom Driver

Aldila NV 2KXV Blue 60 has created NexGen Micro Laminate Technology™ – new, even thinner high performance carbon fibers combined with today’s advanced fiber resin technology. The result is even more layers of carbon fiber offering maximum consistency and performance.

Aldila NV 2KXV Green 65 featuring Micro Laminate Technology®, was introduced it quickly became the number one aftermarket golf shaft ever offered. After years of development, Aldila has created NexGen Micro Laminate Technology™ – new, even thinner high performance carbon fibers combined with today’s advanced fiber resin technology.

Aldila NV 2KXV Green 75 the result is even more layers of carbon fiber offering maximum consistency and performance. What separated the original NV from the other shafts available was what some referred to as its ‘perfect feel’.

Aldila NV 2KXV Orange 65 provides for even better feel and performance. Available in the standard Green design or for those seeking a slightly higher ball flight, there is the Orange design.

Aldila NV 2KXV Orange 75 featuring Micro Laminate Technology®, was introduced it quickly became the number one aftermarket golf shaft ever offered, a favorite of Tour pros and amateurs alike.

Aldila Quaranta 40 ultra lightweight shafts give up strength, flex, torsional stiffness, and overall stability in an effort to chase lighter weights. Our engineers have incorporated our NexGen Micro Laminate Technology® (MLT) to provide the highest level of performance in an ultra lightweight shaft.

Aldila Rogue White 130 MSI 60 pushes the limits of performance with the use of extremely high modulus, 130 M.S.I. Graphitic Carbon Fibers to provide the ultimate in performance from a Mid Launch, Low Spin profile.

Aldila Rogue White 130 MSI 70 profile fills the performance gap between the Low Launch, Low Spin profile of the ROGUE® Silver 130 M.S.I. and the Mid/High Launch, Mid spin profile of the ROGUE® Black 130 M.S.I.

Aldila Rogue White 130 MSI 80 Shafts with MLT use up to twice as many prepreg plies as alternative shafts, producing a stable, solid laminate void of “dead zones”. This design revolution eliminates inconsistent shots caused by shaft variability, while enhancing feel.

Aldila Rogue Silver 110 MSI 60 A stiff tip profile generates the Mid/Low Launch, Mid/Low Spin launch characteristics that the ROGUE® Silver 110 M.S.I. shafts are renowned for.

Aldila Rogue Silver 110 MSI 70 Combining matte and gloss finished give the 2nd Generation ROGUE® Silver 110 M.S.I. a premium look to match its performance.

Aldila Rogue Black 130 MSI 60 offers unmatched performance and consistency through the use of advanced, extremely high modulus, Graphitic Carbon Fibers that provide performance characteristics never before available in a golf shaft.

Aldila Rogue Black 130 MSI 70 is a mid-high launch, mid spin shaft with a reinforced tip-section fortified with 130 M.S.I. Graphitic Carbon Fiber and a higher-balance point.

Aldila Rogue Silver 60 offers unmatched performance and consistency through the use of advanced aerospace materials and design technology. The ROGUE® unique taper shaft profile provides exceptional feel and consistency.

Aldila Rogue Silver 70 Designed with advanced, high modulus “Gaphitic Carbon” fibers that provide unmatched performance.

Aldila Synergy 60 with its constant taper design, smooth balanced profile, and a Graphene fortified tip-section provides both exceptional feel and a smooth, controlled release all the while delivering unparalleled stability through the lower third of the shaft.

Aldila Synergy 70 Designed for the player looking for a mid-launch, low spin profile that has been optimized with the cutting edge in material technology and design.

Aldila Tour Blue Graphite utilizes the latest materials and manufacturing technology to create a new shaft designed to maximize the power of your individual golf swing.

Aldila Tour Green Graphite The ultra thin, ultra strong material allows for the construction of a shaft with outstanding performance and unparalleled consistency.

Aldila X Torsion features a stiff tipped, Counter Balanced design along with a new and unique woven graphite material on the outer layer of the shaft at the tip-section.

Fujikura ATMOS TS Black 7 is a true tour flighted line of shafts with a simple color coding – red as the higher launching, blue as mid launch, black as the lowest launch – similarities include keeping the handle flexes the same for feel, but adjusting mid and tip sections for launch and spin to achieve your desired ball flight.

Fujikura ATMOS TS Blue line is geared towards the performance golfer looking to keep the ball flighted down with low spin.

Fujikura Speeder Evolution V 661 The materials and engineering processes that make up the V were more advanced than any Speeder that came before. New technologies include a new High-strength intermediate modulus (IM) material for lightweight stability and a new “Engineered Outer Bias Technology” that creates smoother loading feel.

Fujikura Speeder Evolution V 757 Technologies that carry over from previous Evolution shafts include MCT (Metal Composite Technology), 90 Ton Carbon Fiber for ultra-lightweight stability and MCFC (Maximum Carbon Fiber Content) pre-preg material.

Fujikura Speeder Evolution IV 661 is developed with the most advanced technologies in the graphite shaft industry. Building on the performance, engineering and material integrations of the Evo II and Evo III, the Evo IV sets the new standard.

Fujikura Speeder Evolution IV 757 IV is based on the profile of the II (low launch and low spin), but has a slightly softer mid to tip section to increase launch angle while maintaining low torque/spin with added high-strength materials.

Fujikura Speeder Evolution VII 569 EVO VII utilizes Pitch 70 ton Woven Carbon Fiber to reduce twisting at impact and Fujikura’s MCT® (Metal Composite Technology) positions the balance point for stability to help maintain and improve ball speed.

Fujikura Speeder Evolution VII 661 Designed as a mid launch profile, EVO VII provides golfers with a higher launch than EVO VI and lower than EVO V.

Fujikura Speeder Evolution VII 757 Multi-hoop plied structure – internal and external hoop layers provide strength, preventing ovalization and increasing stability.

Fujikura Ventus Blue The exceptionally engineered Ventus is designed to significantly tighten shot dispersion and maximize ball speed especially on off-center shots.

Fujikura Ventus Red Ventus is a Tour-inspired profile and the first to include Fujikura’s all-new VeloCore Technology in an accelerated taper, ultra-stiff tip profile.

Fujikura Ventus Black Maximum energy transfer from the tip section boosts the clubhead’s performance and a straight taper design enhances loading and feel.

GD Tour AD BB-6 utilizes premium, aerospace quality 50t carbon-fiber materials to provide the best performing shaft available as well as the Toray Company’s 1st generation of NANOALLOY material technology known as “DI Technology” in the tip section of the shaft.

GD Tour AD BB-7 design features an increase in stiffness from the tip to the mid-section resulting in a higher kick point for lower launch angles. The end result is a tighter shot pattern and an increase in ball speed.

GD Tour AD DI-6 designed to provide golfers with more power and stability in a golf shaft. The Tour AD DI is our first shaft design that was integrated with Toray Company’s original NANOALLOY material technology in the tip section of the shaft. This material technology has now come to be known as “DI Technology”.

GD Tour AD DI-6 Black Consisting of the advanced, 1st generation of Toray Composites NANOALLOY Material Technology for increased stability in the mid to tip region and unsurpassed feel.

GD Tour AD DI-7 also utilizes premium, aerospace quality 50t carbon-fiber materials to provide the best performing shaft available.

GD Tour AD GP-6 like its predecessors, utilizes premium, aerospace quality 50t carbon-fiber materials in order to deliver the best feeling and performing shaft available to golfers.

GD Tour AD GP-7 The Tour GP-4’s are unique and designed for a player that is looking for a light weight shaft with a soft tip to butt profile that will help launch the ball higher.

GD Tour AD IZ-6 shaft has a firm stiffness starting at the handle, and medium center section and a firm+ tip profile to promote a high launch angle and low ball spin rates.

GD Tour AD IZ-7 utilizes TORAYCA ® T1100G carbon-fiber pre-preg with NANOALLOY ® technology in the tip section of the shaft for additional shaft stability, exceptional feel and precise ball control.

GD Tour AD MT-6 features a stiffer mid-section and slightly softer tip than the Tour AD DI. This design feature will produce optimal launch and spin characteristics in today’s modern low spin drivers.

GD Tour AD TP-6 designed around new tooling, the Tour AD TP uses a brand new technology called FFT for Fast Taper Technology. This new technology incorporates a faster taper rate from the lower mid-section to the tip of the shaft than previous Tour AD wood shaft models.

GD Tour AD TP-7 shaft has a medium stiffness starting at the handle thru the mid-section of the shaft and a stiff tip profile to promote a mid/high launch condition and low spin.

Mitsubishi Diamana DF 6 designed from both White Board and Blue Board. Combining these tour-proven designs along with Mitsubishi's latest materials are what makes the Diamana DF-Series so great.

Mitsubishi Diamana DF 7 Using DIALEAD Pitch Fiber and several other materials like MR70 Carbon Fiber and a hybrid prepreg make the DF-Series significantly stronger. Players get stability and strength in a stiff tip low launch profile.

Mitsubishi Diamana RF Series Red 60 Strategically positioned DIALEAD™ Pitch Fiber, MR70 and boron fiber infused hybrid prepreg deliver unmatched strength, stability and performance from this higher launching profile.

Mitsubishi Diamana RF Series Red 70 represents the next generation version of MCA GOLF’s signature “active” bend profile. The new RF-Series, like its most recent predecessor the Diamana™ R-Series, incorporates high-strength DIALEAD™ Pitch Fiber by Mitsubishi Chemical into the butt-section of the shaft, adding unprecedented strength and control during shaft loading and unloading.

Mitsubishi Diamana S+ Limited 60 incorporates Mitsubishi Chemical’s own DIALEAD™ Pitch Fiber into the butt-section of this new design to deliver enhanced stability and increase energy transfer in the time tested and tour proven “smooth” Blue Board profile.

Mitsubishi Kuro Kage Black DC 55 The lightest of the two weight options also incorporates the Straight Flight Weighting (SFW) System that helps golfers turn the club over easier through impact, which in turn straightens a slight fade or promotes a slight draw.

Mitsubishi Kuro Kage Silver TiNi 60 features a tip-stiff bend profile, offering more feel in the hands, with extreme control. Our TiNi Wire and Low Resin Content (L.R.C.) prepreg is positioned in the lower third of the shaft for increased stability and feel at impact.

Mitsubishi Kuro Kage Silver TiNi 70 Features Low Resin Content (L.R.C.), high density prepreg for increased strength without additional weight and for the player who wants a mid launching and mid to low spinning “smooth” bend profile that provides extreme control and stability.

Mitsubishi Tensei AV Orange 55 is a Counter-Balanced shaft that shifts the balance point towards the hands, giving players the opportunity to make specific performance adjustments by altering shaft length or adding weight to the clubhead.

Mitsubishi Tensei AV Orange 65 The RAW finish reveals the Aluminum Vapor (AV) Coated Weave in the butt section, a visible cue of the added stability this unique weave provides. Power transfers straight from the hands through the ball for consistent, mid-launching flight.

Mitsubishi Tensei AV Orange 75  is a Counter-Balanced shaft for players making specific weight adjustments, who want to feel greater stability and control throughout the swing.

Mitsubishi Tensei AV RAW Blue 65 blends modern performance with a classic, smooth bend profile. The RAW finish reveals the Aluminum Vapor (AV) Coated Weave in the butt section, a visible cue of the added stability this unique weave provides.

Mitsubishi Tensei AV RAW Blue 75 Power transfers straight from the hands through the ball for a consistent, mid-launching flight. The 55g option includes our Straight Flight Weighting (SFW) system which makes it easier to turn the club over through impact, reducing the tendency to fade the ball or even promoting a slight draw.

Mitsubishi Tensei CK-Series Blue 60 features a multi-material design that optimizes classic, tour-proven MCA GOLF bend profiles in much the same manner as racecar designs use exotic materials to enhance performance and efficiency.

Mitsubishi Tensei CK-Series Blue 70 combines 11 different prepreg materials, including our Low Resin Content (L.R.C.) Prepreg, ultra-thin prepreg and for the first time a Carbon Fiber/DuPont™ Kevlar® weave featuring Mitsubishi Chemical carbon fiber – refining MCA GOLF’s tour-proven, classic smooth bend profile, taking it to an entirely new level.

Mitsubishi Tensei CK-Series Orange 60 builds off of MCA GOLF’s classic, smooth bend profile and incorporates the same Carbon Fiber/DuPont™ Kevlar® (CK) weave found in the butt-section of all TENSEI™ CK shafts – providing enhanced stability and maximum feel, in an extremely versatile design.

Mitsubishi Tensei CK-Series Orange 70 has a unique counter balanced design for player’s looking to fine-tune their golf club performance.

Oban Devotion 6 most diverse offering with various shaft weights ranging from 43 grams to 84 grams. The design pattern remains consistent throughout the Devotion Series, while kick points and torques vary depending on the weight class.

Oban Kiyoshi Purple 65 design utilizing breakthrough Emersion Wrapped Frequency Technology – offering high launch and low spin ball flight characteristics. Torques will vary depending on the shaft weight class.

Ping ALTA CB 55 counter-balance design allows for more head mass to increase energy transfer.

Ping ALTA CB 70 Color-Shift Paint Technology means the vibrant copper shaft paint transitions to nearly black at address to eliminate distraction.

Ping ALTA CB 55 Red High-trajectory, lightweight counter-balanced design with 8-gram counterweight.

Ping ALTA CB 65 Red An eight-gram counterweight in the grip end helps shift the CG higher, allowing for an increase in energy transfer and momentum, resulting in more ball speed and greater forgiveness.

Ping ALTA CB 55 Slate The next generation of PING's proprietary counter-balanced shaft is lightweight and high-launching while offering more stability and a consistent feel. An eight-gram counterweight in the grip end helps shift the CG higher, allowing for an increase in energy transfer and momentum, resulting in more ball speed and greater forgiveness.

Ping ALTA Distanza 40 A lightweight and high-launching shaft helps golfers maximize distance, while still offering a stable consistent feel.

Ping ALTA CB 70 Slate 

Ping Tour 173-65 

Ping Tour 173-75 

Project X EvenFlow Riptide 50 is designed with improved stability that builds on the widely successful “even bend” profile to provide unmatched feel and maximum energy transfer.

Project X EvenFlow Riptide 60 Riptide is a mid spin/launch design and features Torsional Stability Optimization which allows for an extremely stable shaft while maintaining the signature smooth EvenFlow feel.

Project X EvenFlow Riptide 70 shafts offer the signature energetic feel of Evenflow but with more stability.

Project X EvenFlow Riptide CB 40 brings a counter-balanced design to the Riptide family. With similar playing characteristics to the non counter-balanced Riptide.

Project X EvenFlow Riptide CB 50 Riptide CB is designed with improved stability that builds on the widely successful "even bend" profile to provide unmatched feel and maximum energy transfer.

Project X EvenFlow Riptide CB 60 Riptide CB also features Torsional Stability Optimization which allows for an extremely stable shaft while maintaining the signature smooth EvenFlow feel.

Project X EvenFlow Riptide CB 70 This shaft is designed for smoother swings and comes fitted with a free adapter and grip.

Project X Even Flow Black 75 is a low launching/spinning option in the EvenFlow family. EvenFlow shafts feature an “even” bend profile that transfers shaft load more efficiently throughout the swing to create maximum energy release at impact. The result is a powerful flow of energy that feels smooth while delivering gnarly distance, making EvenFlow the ultimate compliment to the Project X HZRDUS line.

Project X Even Flow Blue 65 launch higher and spin more, appealing to golfers who want an even smoother-feeling shaft or a higher ball flight.

Project X HZRDUS Black 65 delivers insane distance for the stronger and more aggressive golfer, without sacrificing control. The shaft features increased stiffness along the full length of the golf shaft, which allows golfers to put more power behind the ball.

Project X HZRDUS Black 75 is a low spinning and low launching shaft that is available in models for both woods and hybrids.

Project X HZRDUS Smoke Blue RDX 60 is a counter balanced golf shaft with a soft middle section and stiff tip section. This shaft produces golf shots that generally are medium to low launching with low spin.

Project X HZRDUS Smoke Blue RDX PVD 60 With a unique bend profile that strategically changes per flex for player optimization, and the use of Hexcel’s HexTow® carbon fibers, Smoke Blue RDX is a shaft that ticks all these boxes.

Project X HZRDUS Smoke Blue RDX PVD 70 the counterbalanced Smoke Blue RDX has low launch and spin characteristics in a profile with a softer mid section and extremely stiff butt and tip sections.

Project X HZRDUS Smoke Blue RDX PVD 80 Smoke Blue RDX is available in a gloss black finish, PVD Blue finish and a limited edition U.S.A. themed PVD Blue version exclusively through Performance Fitting Centers.

Project X HZRDUS Smoke Black RDX 60 is a distinguished mark of the aggressive swinger, and that legacy is continued with the new HZRDUS Smoke Black RDX. Built with 100% aerospace materials.

Project X HZRDUS Smoke Black RDX 70 is the first shaft to utilize Hexcel’s new HexTow® HM54 high modulus carbon fiber and combines it with high tensile strength HexTow® IM2C carbon fiber to provide the ideal blend of stiffness and stability desired by the HZRDUS player.

Project X HZRDUS Smoke Black RDX 80 features an ultra-stiff midsection along with a stiff tip section to provide a low launch and low spin shaft designed to keep up with your swing.

Project X HZRDUS Yellow 65 is a backweighted low spinning shaft featuring a straight tapered midsection. This profile is perfect for players with a smooth tempo who want to reduce launch and spin rates.

Project X HZRDUS Yellow 75 is designed to deliver insane distance to the new stronger and more aggressive golfer, without sacrificing distance and control.

UST Helium 5  a light weight design using materials in innovative ways for the best in feel and stability never seen before in light weight structures. This is for the golfer seeking to maximize distance with longer builds and incredible control.

UST Proforce V2 6 High modulus material positioned strategically in the shaft for an amazing feel in the hands.

UST Proforce V2 7 for the player seeking a medium ball flight, increased ball speed and superior control.

UST Proforce V2 Black 6 hybrid shafts is a Tour-proven, high performance hybrid graphite shaft that features the highest quality materials for the best feel and performance.

UST Proforce V2 Black 7