Cobra RADSpeed One Length Iron Set
The RADSPEED irons feature our most advanced technologies including, RADIAL weighting, PWRSHELL, and a 3D printed medallion, to create our most innovative and highest performing irons yet.
RADIAL WEIGHTING
EXTREME HEEL AND TOE WEIGHTING
10g and 3g of mass is positioned on the toe and heel extremities to create the best combination of speed, low spin and stability for optimized performance.
TUNED RAD WEIGHTING
A 10g weight positioned low and in the toe area centers the CG and adds stability for more distance and forgiveness on off-center hits.
RAD TECHNOLOGY
3D PRINTED MEDALLION
3D printing offers unlimited complexity in design, allowing us to produce an intricate lattice medallion structure that saves weight and fine-tunes feel.
FORGED PWRSHELL FACE
A forged PWRSHELL face insert is made of a thin 17-4 stainless steel, and is designed to increase flex on the face and the sole for faster ball speed and higher launch.
CARBON FIBER TOPLINE
A carbon fiber topline saves 2 grams to lower CG and increase MOI. An all new black carbon finish creates the illusion of a thinner topline for a sleeker look at address.
CONSISTENT SET UP AND SWING.
Each ONE Length iron is designed to match 7-iron length (37.5") and weighting to promote one repeatable set up and swing, and consistent gapping and trajectories through the set.
COMPARE IRONS
RADSPEED IRONS
Shape: slightly oversize
Sole width: traditional
Performance: high launch and forgiveness in a traditional, variable length setup
RADSPEED ONE LENGTH IRONS
Shape: slightly oversize
Sole width: wider in long irons (4-6) and traditional in short irons and wedges
Performance: a one length (37.5”) setup maximizes consistency and accuracy by allowing you to use one setup and one swing for every club.
GET CONNECTED
Experience seamless COBRA CONNECT technology and automatic shot tracking Powered by Arccos Golf®. Experience an A.I. platform that features, Arccos Caddie Rangefinder, Smart Distance Club Averages, Strokes Gained Analytics and Caddie Advice to help all golfers make smarter decisions, improve faster and shoot lower scores.
Every Cobra club equipped with COBRA CONNECT comes with a FREE 90-day trial of Arccos Caddie and FREE Arccos Caddie Smart Sensors to pair every club in your bag. Download Arccos Caddie to take advantage of this offer.
Cobra RADSpeed One Length Iron Set Product Specs
| Club | Loft | Lie Angle | Offset | Length with COBRA CONNECT | Length with Standard Grip | Graphite Swing Weight | Steel Swing Weight | Graphite Shaft Flex | Steel Shaft Flex | RH/LH |
| 4 | 19.5° | 65.0° | 6.0 | 37.50" | 37.25" | D0 | D1 | S, R, A | S, R | RH/LH |
| 5 | 22.0° | 64.5° | 5.1 | 37.50" | 37.25" | D0 | D1 | S, R, A | S, R | RH/LH |
| 6 | 24.5° | 64.0° | 4.2 | 37.50" | 37.25" | D0 | D1 | S, R, A | S, R | RH/LH |
| 7 | 27.5° | 63.5° | 3.2 | 37.50" | 37.25" | D0 | D1 | S, R, A | S, R | RH/LH |
| 8 | 32.0° | 63.0° | 2.6 | 37.50" | 37.25" | D0 | D1 | S, R, A | S, R | RH/LH |
| 9 | 37.0° | 62.5° | 2.0 | 37.50" | 37.25" | D0 | D1 | S, R, A | S, R | RH/LH |
| PW | 42.5° | 62.0° | 1.5 | 37.50" | 37.25" | D1 | D2 | S, R, A | S, R | RH/LH |
| GW | 48.0° | 61.5° | 1.0 | 37.50" | 37.25" | D1 | D2 | S, R, A | S, R | RH/LH |
| SW | 54.0° | 61.5° | 0.5 | 37.50" | 37.25" | D1 | D2 | S, R, A | S, R | RH/LH |
Note: this is for your reference only and does not denote the content of the product.
SHAFT SPECS
Steel - KBS Tour 80
The lightest shaft in KBS's lineup, the KBS TOUR 80 is used in the long irons to provide higher trajectories, and added spin for maximum distance.
4 Iron - 6 Iron
| Model | Flex | Shaft Weight | Kick Point | Trajectory | Spin | Tip Diameter |
| KBS Tour 80 | Stiff | 100g | Mid-Low | Mid-High | Mid 0.370 | |
| KBS Tour 80 | Regular | 100g | Mid-Low | Mid-High | Mid | 0.370 |
Steel - KBS Tour 90
The KBS TOUR 90 is used in the mid irons to provide higher trajectories, and optimized spin for added distance.
7 Iron - 9 Iron
| Model | Flex | Shaft Weight | Kick Point | Trajectory | Spin | Tip Diameter |
| KBS Tour 90 | Stiff | 102g | Mid-Low | Mid-High | Mid | 0.370 |
| KBS Tour 90 | Regular | 95g | Mid-Low | Mid-High | Mid | 0.370 |
Steel - KBS Tour 120
The KBS TOUR 120 is used in the wedges to provide lower and more controlled trajectories for maximum precision 100 yards in.
PW - SW
| Model | Flex | Shaft Weight | Kick Point | Trajectory | Spin | Tip Diameter |
| KBS Wedge | Stiff | 120g | Mid-Low | Mid-High | Mid | 0.370 |
| KBS Wedge | Regular | 110g | Mid-Low | Mid-High | Mid | 0.370 |
Graphite - UST Recoil 460 ESX
The Recoil 460 ESX graphite shafts in the long, mid and short irons are designed to promote maximum control and distance for approach shots into the green.
4 Iron - 9 Iron
| Model | Flex | Shaft Weight | Kick Point | Torque | Launch | Spin | Tip Diameter |
| UST Recoil ESX 460 | Stiff (F4) | 67g | Low-Mid | 4.6 | High | Mid | 0.370 |
| UST Recoil ESX 460 | Regular (F3) | 65g | Low-Mid | 4.7 | Mid-High | Mid | 0.370 |
| UST Recoil ESX 460 | Lite (F2) | 63g | Low-Mid | 4.8 | Mid-High | Mid | 0.370 |
Graphite - UST Recoil 480 ESX
A heavier Recoil 480 ESX graphite shaft in the wedges create a lower trajectory for increased control for touch shots around the green with wedges.
PW - SW
| Model | Flex | Shaft Weight | Kick Point | Torque | Launch | Spin | Tip Diameter |
| UST Recoil ESX 480 | Stiff (F4) | 75g | Low-Mid | 4.6 | High | Mid | 0.370 |
| UST Recoil ESX 480 | Regular (F3) | 72g | Low-Mid | 4.7 | Mid-High | Mid | 0.370 |
| UST Recoil ESX 480 | Lite (F2) | 69g | Low-Mid | 4.8 | Mid-High | Mid | 0.370 |
Lamkin Crossline (58+) Cobra Connect - Black / Blue
Specification
| Construction | Iron Back | MSRP |
| Cast | Cavity Back | $999.00 |